Fiber LaserAn entry-to-mid power fiber sheet cutter on a standard 1500 by 3000 mm bed, offered in 1.5, 2 and 3 kW with an IPG or Raycus source and a Bochu head. It holds position accuracy under 0.04 mm at cutting speeds to 40 m per minute, and larger beds up to 2000 by 8000 mm are built to order. A sensible first machine for shops cutting thin to medium gauge sheet without paying for power they do not need.
Fiber LaserThe HX-1530 fitted with an exchange table so an operator loads and unloads one pallet while the beam keeps cutting on the other. Laser power, head and motion specifications match the base HX, but throughput rises because the machine is not idle during material handling. The right configuration when loading time, not laser power, is the constraint on output.
Fiber LaserA 6 kW fiber sheet cutter for small to medium production where thicker plate and faster traverse matter. The higher power and a 120 m per minute travelling speed lift output over the entry HX range while holding the same sub 0.04 mm accuracy. Beds extend to 2000 by 12000 mm for longer stock.
Fiber LaserThe 6 kW JX with a rotary attachment, so a single machine cuts both flat sheet and round pipe or tube. Flat-cutting performance matches the standard JX-1530 while the rotary opens up mixed sheet and tube job work. A flexible choice for shops that cannot dedicate a separate machine to tube.
Fiber LaserA high power 12 to 30 kW cutter combining an exchange table with a rotary so it runs thick plate and pipe at speed with no loading downtime. Cutting speed reaches 60 m per minute and travel 140 m per minute, with the same sub 0.04 mm accuracy as the lower power machines. Built for the heaviest continuous production.
Fiber LaserThe Pro high power cutter with a compact table change that exchanges sheets quickly in a tighter footprint than a full exchange line. It delivers the same 12 to 30 kW output and 60 m per minute cutting as the larger TC machines while saving floor space. For shops that want high power throughput where room is limited.
Fiber LaserAn extra large format gantry cutter running on ground rails, with fiber power from 12 up to 80 kW for long and heavy sheet. Beds reach 4000 mm wide and 28000 mm long, with any size built to specification. This is the platform for oversized plate, structural stock and shipyard work that will not fit a standard table.
Fiber LaserA dedicated tube and pipe laser cutter for 3 or 6 metre lengths at up to 3 kW, with purpose built tube handling and a Bochu head. Position accuracy holds at or under 0.04 mm for clean, repeatable cuts across a range of profiles. The straightforward choice when most of the work is tube rather than sheet.
Fiber LaserA high speed, high precision tube cutter for 3 or 6 metre stock, available in power ratings up to 12 kW. Practical cutting capacity is roughly 4 mm in stainless and 8 mm in mild steel. A strong choice for industrial shops where tube cutting is core output.
Fiber LaserA five axis fiber laser system for complex three dimensional sheet and formed part cutting, designated MX-2040-5X with a 2 by 4 metre reference working size. Configurations are built to customer requirement, so the working envelope and power are specified per project. Full specifications are available on request.
Fiber LaserA handheld fiber laser welder in 1.5, 2 and 3 kW on a Raycus source, with a wobble gun and integrated wire feeder. Power is adjustable from 10 to 100 percent and the chiller sits inside the cabinet, so it works as a single mobile unit. A torch style tool that suits repair, fabrication and custom work where a fixed station is impractical.
Fiber LaserOne handheld unit that welds, cuts, cleans and seam cleans metal, sharing the Galaxy platform across 1.5 to 3 kW. At 3 kW it welds up to 8 mm in mild and stainless steel and cuts up to 2 mm stainless or 3 mm mild steel, so it replaces several separate tools. A flexible answer for a busy shop that needs more than one process from one machine.
Fiber LaserA manual laser welder in 2 and 3 kW on a Raycus source, with integrated wire feed and laser cleaning under HMI control. The 3 kW model welds up to 5 mm stainless or mild steel and 4 mm aluminium or nickel, with a 10 metre delivery cable usable to 8 metres for reach. Red light positioning and CW or modulated output suit varied production welding.
Fiber LaserAn automatic laser welding station for EV battery pack assembly, in 3 and 6 kW with CW or modulated output and under 3 percent power stability. A 700 by 500 mm servo table on ball screw axes handles tab, cell and busbar welding with the repeatability that battery work demands. Built for precise, low heat input joining on production lines.
Fiber LaserA dedicated tube welder in 3 and 6 kW on Raycus sources, with HMI and PLC control plus CCD monitoring of the seam. The 6 kW model runs continuous welds at 8 to 9 metres per minute against the 3 kW machine's 7 to 8. Built for fast, repeatable seam welding in tube and pipe production.
Fiber LaserA fiber laser marking and coding unit at 1064 nm in 30, 50 and 100 W for permanent marks on metals. On the fly and static marking, a 10 inch touchscreen and an interconnect cable between enclosure and laser head make it straightforward to drop onto a production line. Min line width is 0.1 mm with character sizes from 0.3 mm.
Tell us the product, industry and volume, we'll recommend the right machine and quote it.
Request a Quote